Featured

This is the post excerpt.

Advertisements

Difference Between Disc Brakes and Drum Brakes – Toughla

Brakes are the main stopping force for your vehicle outside of engine braking and scraping up against the occasional curb or barrier. Most brakes come in two forms, disc and drum form factors, each accompanying their own particular advantages and deficiencies which will be covered in this article.

Literally a Drum Brake is a small round drum that has a set of shoes inside of it. The drum brake will turn close by the haggle the brake pedal is connected, the shoes are forced against the sides of the drum and the wheel is slowed.

Disc Brake has a disc shaped metal rotor spinning within a wheel. When pressure is applied to the brake pedal a caliper will squeeze the brake pads against the disc. This will slow the wheel down as more pressure is applied to the brake pedal, bringing the car to a halt.

Benefits of drum brakes?

  • Drum Brakes are simplifies maintenance, with most components being held in place by spring tension. To replace a set of shoes, you simply pry the springs in a drum brake system loose with a brake tool and the entire braking assembly comes apart. Swap in a new set of shoes, reconnect the brackets & springs, put the drum back on and you’re done.
  • There’s no need for compressors to retract pistons with these setups. As a matter of fact, replacing brake shoeson some vehicles can be accomplished in under 2 minutes, once the drum is removed.

Benefits of disc brakes?

  • Increased stopping power over the drum brakes.
  • Better heat dissipation than drum brakes.
  • Disc brake systems can be inspected without removing your wheels.
  • Unlike drum brakes, circle slowing mechanisms is totally, self-changing.
  • Disc brakes are more common, so you have a wide selection of performance disc brake pads to choose from.

About the Author

Toughla has a team of excellent engineers who work day in day out to improve the technology further. We perform some international level technology upgrade exercises as well where we invite engineers from countries like Germany, France and Italy to help us further improve our technology.

Toughla is a leading manufacturer of brake lining and brake pads. They are based out of Delhi. Toughla is a leading supplier of quality car brake pads, truck brake lining, and truck brake pads etc. They manufacture products suitable for TATA trucks, Mahindra vehicles, and buses. They have a decade old history and they supply products globally. Do visit our website http://www.toughla.com/brakelinings/ to know further.

Toughla are ISO 9001:2000 and NSIC Registered, due to which are standards are at par with  international standards. Achieving 1st Position of Best Performance among Distributors in the year 2014-2015.

 

 

Buy Brake Pads Online At Best Prices In Delhi – Toughla

Brake pads are supply of the friction the discs need to stop your vehicle wheels. As a result, they play a vital role in your safety and that of others on the road. Brakes are the most important part of the vehicle.

Toughla is a leading manufacturer of brake lining and brake pads. They are based out of Delhi. Toughla is a leading supplier of quality car brake pads, truck brake lining, and truck brake pads etc.

At toughla.com anyone can buy Tata truck brake parts, Order car brake pads online etc. at reasonable prices. They also manufacture products suitable for TATA trucks, Mahindra vehicles, and buses. They have a decade old history and they supply products globally.

Do know more visit at http://www.toughla.com/download-catalogue/

Toughla Offers:

  1. Wide Range: suppliers of friction material such as brake shoes, brake linings in India.
  2. Superior Quality: Toughla provides highest level of compliance to quality and defect prevention, which explains their commitment to quality.
  3. Green Technology: They ensure sustainability and promote environment friendly green methods to the maximum extent possible.

Products manufactured by the Toughla:

  1. LCV & Car Brake Lining Manufacturers
  2. Brakes Pads Manufacturers & Suppliers
  3. Brake Pads and Rotors Manufacturers
  4. TATA & Mahindra Truck Brake Manufacturers
  5. HCV Brake Lining Manufacturers
  6. Disc Pads
  7. Brake Shoe

Toughla has a team of excellent engineers who work day in day out to improve the technology further. We perform some international level technology upgrade exercises as well where we invite engineers from countries like Germany, France and Italy to help us further improve our technology.

How to change your car brake pads?

Step 1. Remove the wheel from car

c1

Loosen the wheel nuts and then, with the help of a lifting jack, raise your Car and place a jack stand underneath to keep it locked in place. Now remove the wheel nuts completely from the wheel to access the braking assembly.

After removing the wheel you can see the brake pads

Capture11

Step 2. Open the piston and remove the brake pads.

Capture12

The next step is to remove the brake pads From the rotor.

Step 3. Now install new brake pads.

w4                               Capture13

 

If you need new brake pads, You can buy from here. http://www.toughla.com/

Step 4

Capture14

Capture15

Place the new segments in their predetermined places and apply graphite construct oil with respect to the finishes of the brake pads so they can slide effortlessly more than each other. In any case, ensure that the oil does not touch the rotor or gather on the pads’ surface as this may end up being destructive. Safely hook every one of the nuts, screws and sticks what’s more, check them precisely for any wear and tear. Supplant if required.

Step 5. Close up the caliper after installing the brake pads.

Capture16

Capture17

Step 6. Reattached the wheel after change the brake pads

Capture18.JPG

Capture19

 

Infuse new braking liquid and after that supplant the levels. Fix the haul nuts and rehash the procedure on the opposite side of the car.

Contributor:

Toughla Brake Lining is a developing pioneer in the field of grinding innovation. We are resolved to give the items that meet fantastic principles to our customer base. Each of our items experiences extreme investigation registration to guarantee most extreme advantage to the customers and clients.

We trust our duty is to fabricate items that satisfy showcase requests in a protected, financially savvy and eco well-disposed way. At Toughla Brake Linings, we have group of superb Engineers, Auto Mechanics and R&D Experts. We additionally fuse the current innovation and PC re-enactment to enhance the nature of our items and check them to guarantee wellbeing.

LCV Brake Pad Manufacturer and Supplier in India- Toughla

LCV Brakes are known as Light Commercial Vehicle brake. LCV Brake pads are mostly used for car, van and small vehicles. Toughla is the top supplier and manufacturer of LCV Brake pads and Brake Lining.

Brake pads are one of the main components in a normal vehicle’s braking system. Brake pads are very important in terms of a vehicle’s safety. Braking system that provides the friction to slow or stop your vehicle.

About Toughla:                                                         

Toughla is a leading manufacturer of brake lining and brake pads. They are based out of Delhi. Toughla is a leading supplier of quality car brake pads, truck brake lining, and truck brake pads etc. They manufacture products suitable for TATA trucks, Mahindra vehicles, and buses. They have a decade old history and they supply products globally. Do visit our website www.toughla.com to know further.

Toughla Offers:

  1. Wide Range: suppliers of friction material such as brake shoes, brake linings in India.
  2. Superior Quality: Toughla provides highest level of compliance to quality and defect prevention, which explains their commitment to quality.
  3. Green Technology: They ensure sustainability and promote environment friendly green methods to the maximum extent possible.

Toughla LCV Products

  1. TATA Engg,
  2. Shakti Man,
  3. Swaraj India,
  4. Eicher Mitsubishi,
  5. DCM Toyota,
  6. Mahindra Allwyn Nissan.

Toughla

Toughla is a top manufacturer of Asbestos free and Asbestos Based Brake Linings. We prefer that the complete range of products offered by us come with highest degree of technical feasibility as well as are most competitive & high-quality product with least environmental impact. We believe our responsibility is to manufacture products that meet market demands in a safe, cost-effective and environment compatible manner.

Why Choose Toughla:

Toughla is an upcoming leader in friction technology and it is committed to highest quality. Each and every product that is manufactured at the production facility of Toughla passes through a stringent quality check before it is shipped to clients. Toughla has a team of excellent engineers who work day in day out to improve the technology further. We perform some international level technology upgrade exercise as well where we invite engineers from countries like Germany, France and Italy to help us further improve our technology.

Toughla is a preferred brand because of the following reasons:

1 We have mastered the technology and today we are capable  providing high degree of customization to meet your requirements.

  1. High engineering standards
  2. Value for money

Do Know More About Toughla Visit At: http://www.toughla.com/download-catalogue/